GP ACETOXY SILICONE SEALANT 300g_x000D_ For general-purpose applications. Good adhesion on nonporous material with resistance to fungal growth _x000D_ ELASTO® Acetoxy is a one-part, medium modulus, anti-fungal, acetoxy_x000D_ curing silicone sealant for general purpose applications. Very good adhesion_x000D_ and assembly of non-porous material, such as glass, metal, tiles, wood,_x000D_ concrete and some plastics. It is especially suitable in applications where there_x000D_ is exposure to humidity, such as kitchens and bathrooms due to its anti-fungal_x000D_ capabilities that prevent the growth of mold on the sealant. _x000D_ Features_x000D_ • Acetoxy Curing_x000D_ • Medium Modulus_x000D_ • Anti-fungal_x000D_ • Good adhesion_x000D_ • Resistant to ozone, ultraviolet radiation and_x000D_ temperature extremes _x000D_ Surface Preparation_x000D_ Surfaces must be clean, dry and free from grease,_x000D_ dust and frost. In case of renovation work, old_x000D_ sealant as well as old paint must be removed_x000D_ completely. Surface should be cleaned with a_x000D_ suitable solvent for the substrate such as_x000D_ ELASTO® Silicone Cleaner, isopropanol etc._x000D_ Instructions_x000D_ This sealant is ready to use. After suitable joint_x000D_ preparation and masking with a general-purpose_x000D_ masking tape such as Elasto®, the sealant is_x000D_ gunned into place and tooled within 5 minutes,_x000D_ using a spatula which has been dipped in soapy_x000D_ water. Remove masking tape immediately after_x000D_ tooling. If necessary, clean uncured material_x000D_ using an approved sealant remover. For removal_x000D_ of cured material, abrasion or other mechanical_x000D_ means may be needed.