AQUARIUM SILICONE Specially formulated for aquarium manufacturing with superior adhesion to glass tanks. Solvent-free & fish-safe Features • Movement accommodation up to 15% • Non-toxic, Fish safe • Good resistance to UV and temperature extremes • Aging and moisture Resistance Surface Preparation Surfaces must be clean, dry and free from grease, dust and frost. In case of renovation work, old sealant as well as old paints must be removed completely. Surface should be cleaned with a suitable solvent for the substrate such as DYNAPRO® Silicone Cleaner, isopropanol etc. Instructions This sealant is ready to use. After suitable joint preparation and masking using Dyna-Pro® general purpose masking tape, extrude the sealant and tool within 5 minutes, using a spatula dipped in soapy water. Remove masking tape immediately after tooling. If necessary, clean uncured material using an approved sealant remover or other suitable solvent. For removal of cured sealant, abrasion or other mechanical means may be needed. Priming This product features adhesion to a variety of non-porous substrates; however, for specific substrates, priming may be necessary to improve adhesion. Please consult our Technical Service Department.