GP NEUTRAL SILICONE SEALANT_x000D_ For Int./Ext. use in sealing & adhesion on most building_x000D_ materials. Strong adhesion and versatility._x000D_ ELASTO® Neutral is a one-part neutral oxime curing, low modulussilicone_x000D_ sealant especially formulated for sealing and bonding applications._x000D_ ELASTO® Neutral Silicone Sealant offers strong adhesion, good_x000D_ weatherability, durability and elasticity for general window_x000D_ glazing and sealing applications. The sealant is also suitable in_x000D_ areas exposed to humidity such as kitchens and bathrooms_x000D_ due to its anti-fungal properties _x000D_ Features_x000D_ • Low Modulus_x000D_ • Non-Corrosive to Metals_x000D_ • Low Odor_x000D_ • Anti-fungal_x000D_ • Resistant to ozone, ultraviolet radiation and_x000D_ temperature extremes_x000D_ Surface Preparation_x000D_ Surfaces must be clean, dry and free from grease,_x000D_ dust and frost. In case of renovation work, old_x000D_ sealant as well as old paint must be removed_x000D_ completely._x000D_ Instructions_x000D_ This sealant is ready to use. After suitable joint_x000D_ preparation and masking with a general-purpose_x000D_ masking tape such as Elasto®, the sealant is_x000D_ gunned into place and tooled within 5 minutes,_x000D_ using a spatula which has been dipped in soapy_x000D_ water. Remove masking tape immediately after_x000D_ tooling. If necessary, clean uncured material_x000D_ using an approved sealant remover. For removal_x000D_ of cured material, abrasion or other mechanical_x000D_ means may be needed._x000D_ Shelf Life_x000D_ 12 months from date of production, when stored_x000D_ at or below 25°C in the original unopened_x000D_ container