GP ACRYLIC SEALANT Anti-fungal Acrylic Sealant for Internal use in connecting joints, chinks, cracks with excellent adhesion ELASTO® Acrylic is a one-part acrylic sealant for interior sealant applications around windows and doors. Sealant is paintable, flexible and easy to apply. It exhibits good adhesion to building substrates including plaster, concrete, masonry, brickwork, anodized aluminum, gypsum, PVC and wood. It is not generally recommended to paint over elastic expansion joints. Features • Movement accommodation up to 10% • For Indoor Use • Paintable 3 hours after application • Aging Resistance • Solvent Free (water-based) Surface Preparation Surfaces must be clean, dry and free of grease, dust and frost. In case of renovation work, old sealant as well as old paint must be removed completely. It is recommended to apply a suitable back-up material (closed cell polyethylene backer rod or PE-foil) on the bottom of the joint to prevent the sticking of the sealant to the back of the joint. Instructions Application of the sealant during extreme temperature variations should be avoided. Sealant joint width should be designed to accommodate movement capability of sealant. After suitable joint preparation and masking using ELASTO® general purpose masking tape, extrude the sealant and tool within 5 minutes, using a spatula dipped in soapy water. Remove masking tape immediately after tooling. If necessary, clean uncured material using an approved sealant remover or soapy water. For removal of cured sealant, abrasion or other mechanical means may be needed. Priming Porous substrates, e.g. concrete and untreated wood should be pre-treated with a diluted sealant (ELASTO® Acrylic with water in a ratio of 1:1 to 1:5). Before applying primer remove cement grouts, release agents and oil coatings.